Gtouch g6 plus spd frimware - flash file tested fix dead boot lcd problem free

Exclusive free

gtouch g6 plus flash  file Download 

Required Downloads:

• Samsung USB driver – Download and install it on your computer
• Download odin3 From the above link
• Download and Install the Magisk apk on your PC.

Warning:

Try this at your own risk I'm not responsible for any kind of error or damage that occurs to your phone during or after following this guide 

Kg state and OEM lock should be off

How to turn off kg lock

Note! If a file asked for a password please Contact us 

Whatsapp:+923415155269

Follow us on Facebook 

SUBSCRIBE NOW

Date	2021-6-9
Filesize	45 MB
Type	flash File

Download

Pre-Requirements

• Your phone should have battery juice of more than 60% at least.
• Keep a backup of your device data at first. Therefore, if anything goes wrong, you can get back the important data.
• The image file in this article is supported by the A215F  model only. DO NOT try to flash it on other models.
• You will also require a PC/Laptop and a USB cable in order to connect your device with the computer.
• You should download all the necessary files, tools, and drivers from below accordingly.

Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 5.x]

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Infinity SC Firmware Detected

FW Size : 1441 MiB

Load Ok!

File Info

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand   : G-Touch

Device Model   : G6_Pro

Device CPU     : sp7731gea_hdr

Device IntName : G6_Pro

Device Version : 8.1.0

Device Compile : 12/7/2020 12:54:11 PM

Device Project : G-Touch-G6_Pro_Android_8.1_V01_2020-12-07

Device ExtInfo : G6 Pro

Operation : Flash [ v1.27 ]

======= Flash

Files set for flashing : 

[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 49 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x22 records

PMTManager : PMT Update Ok!

Flashing now

Update BootCode : u-boot-spl-16k.bin

Write Data ... 

Write Data Ok!

Update BootCode : u-boot.bin

Erase block ... 

Block erase Ok!

Write Data ... 

Write Data Ok!

Write FSImage : prodnv.img

Write Data ... 

Write Data Ok!

Write CodeData : sc7731g_CP0_modem.bin

Write Data ... 

Write Data Ok!

Write CodeData : DSP_DM_Gx.bin

Write Data ... 

Write Data Ok!

Erase Block : RuntimeData

Erase block ... 

Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W16.21.3_Release.bin

Write Data ... 

Write Data Ok!

Write CodeData : logo_720x1280.bin

Write Data ... 

Write Data Ok!

Write CodeData : fblogo_720x1280.bin

Write Data ... 

Write Data Ok!

Write CodeData : logo2.bin

Write Data ... 

Write Data Ok!

Write CodeData : logo3.bin

Write Data ... 

Write Data Ok!

Write CodeData : logo4.bin

Write Data ... 

Write Data Ok!

Write CodeData : logo5.bin

Write Data ... 

Write Data Ok!

Write CodeData : boot.img

Write Data ... 

Write Data Ok!

Write FSImage : system.img

Write Data ... 

Write Data Ok!

Erase Block : PERSIST

Erase block ... 

Block erase Ok!

Write CodeData : sysinfo.img

Write Data ... 

Write Data Ok!

Write FSImage : cache.img

Write Data ... 

Write Data Ok!

Write CodeData : recovery.img

Write Data ... 

Write Data Ok!

Erase Block : MISC

Erase block ... 

Block erase Ok!

Write FSImage : userdata.img

Write Data ... 

Write Data Ok!

Elapsed: 00:05:49

Reconnect Power/Cable!